With a rated power output of 800 hp (788 bhp) / 588 kW and a peak torque of 1,420 Nm (1,047 lb-ft) this engine catapults the four-door car from rest to 100 km/h (62 mph) in just 3.7 seconds on its way to a top speed of over 370 km/h (230 mph). The exclusively appointed BRABUS E V12 is built in a limited “one of ten” edition and starts at 498,000 Euros MSRP.

BRABUS, recognized by the German Federal Vehicle Registration Agency (Kraftfahrtbundesamt) as a vehicle manufacturer, builds the new E V12 “one of ten” based on the reinforced body of the latest Mercedes E-Class.

The next evolutionary stage of the proven BRABUS SV 12 Biturbo displacement engine is called SV12 R Biturbo 800 and was developed specifically for this vehicle. The engine is implanted into the modified engine bay of the E-Class with almost surgical precision.

Displacement of the twelve-cylinder engine that usually powers the latest Mercedes 600 models is increased from standard 5.5 to 6.3 liters (336 to 384 cu. in.). The increase is affected with a special crankshaft with longer stroke, precision-balanced pistons rods and pistons with a larger diameter and an increased cylinder bore. The inner workings of the BRABUS engine are further modified with special sport camshafts and cylinder heads optimized for mixture flow.

Both the air intake and the BRABUS twin-turbo system were newly developed for this car. The latter features two custom manifolds with integrated high-performance turbochargers and four water-to-air intercoolers. The combustion air is provided by a carbon-fiber RAM-air intake system in the hood. In addition a high-performance exhaust system with free-flow metal catalysts was custom-developed for the platform of the new E-Class.

New engine electronics with specially programmed mapping for injection and ignition ensure not only exemplary power yield but also compliance with the strict EURO IV emission limits. The high-tech lubricants for the entire drivetrain are supplied by technology partner ARAL.

With these modifications the engine of the BRABUS E V12 “one of ten” produces an enormous power output of 800 hp (788 bhp) / 588 kW at 5,500 rpm and an even more impressive peak torque of 1,420 Nm (1,047 lb-ft), available at a low 2,100 rpm. In the car peak torque is limited electronically to 1,100 Nm (811 lb-ft).

Power is transferred to the rear wheels via a reinforced five-speed automatic transmission and a BRABUS high-performance limited-slip differential with a locking rate of 40 percent. The BRABUS E V12 comes standard with state-of-the-art driving stability programs that can be deactivated at the push of a button.

Following the tradition of the first three BRABUS E V12 sedans the 2010 edition once again delivers driving performance normally reserved for only a very few select super sports cars. The sedan, which weighs in at 1,980 kilograms (4,365 lbs), sprints from rest to 100 km/h (62 mph) in just 3.7 seconds. After just 9.9 seconds the four-door car reaches a speed of 200 km/h (124 mph). The 300-km/h (186-mph) mark is reached after just 23.9 seconds. Top speed is more than 370 km/h (230 mph) but is limited electronically for reasons of tire safety to 350 km/h (217 mph).

This extreme performance also places highest demands on the vehicle’s aerodynamic properties. The BRABUS designers went into the wind tunnel to develop a body conversion kit made from high-strength yet especially lightweight carbon fiber. It not only adds 36 millimeters (1.4 inches) to the width of the E-Class and gives it an even more striking appearance; it also minimizes aerodynamic lift on front and rear axle.

The BRABUS front was designed to replace the original apron and provides radiators and front brakes with an optimal supply of cooling air. At the same time the sophisticated shape notably reduces aerodynamic lift on the front axle.

Air vents located behind the wheel arches were integrated into the front fenders. They are also vital to the thermal health of all components in the engine bay and help vent the front wheel houses to reduce lift on the front axle.

The rocker panels route the air stream to the rear wheel arches with minimum turbulence. The rear wheel arches of the “one in ten” edition feature special cowlings called ‘Speed Spads.’

The striking rear of the new BRABUS E V12 sets itself apart with the four characteristic tailpipes of the BRABUS high-performance exhaust system. Also part of the sophisticated aerodynamic-enhancement concept is the rear wing on the trunk lid and the diffuser integrated into the rear apron.

A wider track means better directional stability at high speeds. The widened fenders front and back make room for BRABUS Monoblock Q wheels in size 9.5Jx19. The high-performance tires so essential for these extreme speeds are supplied by technology partners Pirelli and YOKOHAMA. They are mounted on the front axle in size 255/35 ZR 19 and in size 285/30 ZR 19 in back.

The height-adjustable BRABUS coil-over suspension was also custom-developed for the E V12. The ride height of the suspension can be adjusted to the owner’s individual preferences. But that’s not all: Compression and rebound rates of the front and rear dampers can be adjusted in ten steps between very comfortable and extremely firm for use on the racetrack. Sport sway bars reduce body roll in fast corners.

The enormous performance of the BRABUS E V12 also places highest demands on the brakes. The high-performance sedan is equipped with 12-piston aluminum fixed calipers and vented and grooved steel brake discs measuring 380 x 37 millimeters (15.0 x 1.5 inches) on the front axle. The rear axle stops on six-piston aluminum fixed calipers gripping discs measuring 360 x 28 millimeters (14.2 x 1.1 inches). The BRABUS high-performance brake system incorporates all functions of the standard Brake Assist system of the Mercedes E-Class.

The interior of the car exudes a feeling of true exclusive luxury. The sporty-contoured custom front seats and the two rear individual seats are covered with a combination of Alcantara and black leather, smooth or perforated, as are dashboard, door trim and headliner. The entire vehicle floor is covered with square-patterned leather. It alone uses several miles of the finest thread, every inch of it sewn with utmost precision.

The ensemble is completed with matte-black carbon-fiber components for dashboard, center console and door panels. The BRABUS E V12 “one of ten” can be optionally equipped with a cell phone from premium manufacturer Vertu. This exclusive cell phone from the “Vertu Ascent Ti Carbon Fibre” limited edition of 1,500 phones features a titanium housing with the sides clad in black carbon fiber. This especially exclusive phone features 3G and quad-band technology as well as an integrated hands-free option, and represents state-of-the-art communication technology.

Only ten BRABUS E V12 sedans of the “one of ten” edition will be built by hand in a small-series production run. Alternatively the BRABUS E V12 is also offered in a version with 750 hp / 552 kW and a pointedly subtle bodywork without cowlings and rear wing.

BRABUS E V12 “one of ten” – Technical Data

Body

4-door sedan based on Mercedes-Benz E-Class, model series W 212.

Unibody, with BRABUS fender flares and steel body widened by 36 millimeters (1.4 inches). BRABUS E V12 “one of ten” carbon-fiber aerodynamic-enhancement kit with front apron, air vents in front fenders, ‘speed spads’ wheel-house cowlings, rear spoiler lip and rear diffuser. BRABUS hood with integrated RAM-air system.

Dimensions:

Wheelbase 2,760 mm – 108.7 in.
Length 4.891 mm – 192.6 in.
Width 1.908 mm – 75.1 in.
Height 1.422 mm – 56.0 in.
Curb weight 1.980 kg – 4,365 lbs.
Gross vehicle weight 2.390 kg – 5,269 lbs.
Fuel tank/reserve 80 l / 9.0 l – 21.1 gal. / 2.4 gal.

Engine

BRABUS SV12 R Biturbo 800 displacement engine based on Mercedes 600.

V12-cylinder 3-valvel light-alloy engine with two turbochargers
Displacement 6,233 cm³
Compression ratio 9.0 : 1
Rated power output 800 hp (788 bhp) / 588 kW at 5,500 rpm
Torque 1,420 Nm (1,047 lb-ft) from 2,100 rpm (electronically limited to
1,100 Nm / 811 lb-ft)
Fuel Super plus (98 ROZ) / Premium gasoline 98 octane
Motor oil: ARAL

BRABUS SV12 R Biturbo 800 engine conversion consists of:
Displacement increase to 6.3 liters with special crankshaft with longer stroke and larger cylinder bore and corresponding pistons. Inlet and outlet ports of both cylinder heads optimized for mixture flow including installation of special camshafts. BRABUS SV12 R Biturbo 800 system with two high-performance turbochargers and special exhaust manifolds with integrated turbine housings, four water-to-air intercoolers and special air intake tract. BRABUS stainless-steel high-performance exhaust system with free-flow metal catalysts. Newly programmed mapping for engine electronics and on-board diagnostics.

Powertrain

RWD, ESP

Reinforced five-speed automatic transmission

Gear ratios
1st gear 3.59
2nd gear 2.19
3rd gear 1.41
4th gear 1.00
5th gear 0.83
Reverse gear 3.16

BRABUS limited-slip differential with locking rate of 40 percent
Final drive ratio either 2.65 : 1 (V/max 315 km/h / 196 mph) or 2.24 : 1 (V/max more than 370 km/h / 230 mph), electronically limited for use on public roads to 350 km/h / 217 mph).

Suspension

Independent suspension front and back with height-adjustable BRABUS coil-over sport suspension.

Front axle:
Three-link axle, anti-dive geometry. Height-adjustable BRABUS struts with coil springs and gas-pressure shocks with ten selectable settings for compression and rebound, BRABUS sport sway bars.

Rear axle:
Multi-link suspension. Anti-squat and anti-dive geometry. Height-adjustable BRABUS struts with coil springs and gas-pressure shocks with ten selectable settings for compression and rebound, BRABUS sport sway bars.

Wheels:
BRABUS Monoblock Q light-alloy wheels with Pirelli or YOKOHAMA high-performance tires.
Front: 9.5J x 19 H2 with size 255/35 ZR 19 tires
Rear: 9.5J x 19 H2 with size 285/30 ZR 19 tires

Brake system

Dual-circuit brake system with Brake Assist and BRABUS high-performance brakes

Front: BRABUS 12-piston aluminum fixed calipers and vented and grooved steel discs measuring 380 x 37 mm (15.0 x 1.5 inches)
Rear: BRABUS six-piston aluminum fixed calipers with vented and grooved steel discs measuring 360 x 28 mm (14.2 x 1.1 inches)

Performance

0 – 100 km/h (62 mph): 3.7 sec.
0 – 200 km/h (124 mph): 9.9 sec.
0 – 300 km/h (186 mph): 23.9 sec.

Top speed: More than 370 km/h / 230 mph (for tire safety reasons limited electronically for use on public roads to 350 km/h / 217 mph)

With a rated power output of 800 hp (788 bhp) / 588 kW and a peak torque of 1,420 Nm (1,047 lb-ft) this engine catapults the four-door car from rest to 100 km/h (62 mph) in just 3.7 seconds on its way to a top speed of over 370 km/h (230 mph). The exclusively appointed BRABUS E V12 is built in a limited “one of ten” edition and starts at 498,000 Euros MSRP.

BRABUS, recognized by the German Federal Vehicle Registration Agency (Kraftfahrtbundesamt) as a vehicle manufacturer, builds the new E V12 “one of ten” based on the reinforced body of the latest Mercedes E-Class.

The next evolutionary stage of the proven BRABUS SV 12 Biturbo displacement engine is called SV12 R Biturbo 800 and was developed specifically for this vehicle. The engine is implanted into the modified engine bay of the E-Class with almost surgical precision.

Displacement of the twelve-cylinder engine that usually powers the latest Mercedes 600 models is increased from standard 5.5 to 6.3 liters (336 to 384 cu. in.). The increase is affected with a special crankshaft with longer stroke, precision-balanced pistons rods and pistons with a larger diameter and an increased cylinder bore. The inner workings of the BRABUS engine are further modified with special sport camshafts and cylinder heads optimized for mixture flow.

Both the air intake and the BRABUS twin-turbo system were newly developed for this car. The latter features two custom manifolds with integrated high-performance turbochargers and four water-to-air intercoolers. The combustion air is provided by a carbon-fiber RAM-air intake system in the hood. In addition a high-performance exhaust system with free-flow metal catalysts was custom-developed for the platform of the new E-Class.

New engine electronics with specially programmed mapping for injection and ignition ensure not only exemplary power yield but also compliance with the strict EURO IV emission limits. The high-tech lubricants for the entire drivetrain are supplied by technology partner ARAL.

With these modifications the engine of the BRABUS E V12 “one of ten” produces an enormous power output of 800 hp (788 bhp) / 588 kW at 5,500 rpm and an even more impressive peak torque of 1,420 Nm (1,047 lb-ft), available at a low 2,100 rpm. In the car peak torque is limited electronically to 1,100 Nm (811 lb-ft).

Power is transferred to the rear wheels via a reinforced five-speed automatic transmission and a BRABUS high-performance limited-slip differential with a locking rate of 40 percent. The BRABUS E V12 comes standard with state-of-the-art driving stability programs that can be deactivated at the push of a button.

Following the tradition of the first three BRABUS E V12 sedans the 2010 edition once again delivers driving performance normally reserved for only a very few select super sports cars. The sedan, which weighs in at 1,980 kilograms (4,365 lbs), sprints from rest to 100 km/h (62 mph) in just 3.7 seconds. After just 9.9 seconds the four-door car reaches a speed of 200 km/h (124 mph). The 300-km/h (186-mph) mark is reached after just 23.9 seconds. Top speed is more than 370 km/h (230 mph) but is limited electronically for reasons of tire safety to 350 km/h (217 mph).

This extreme performance also places highest demands on the vehicle’s aerodynamic properties. The BRABUS designers went into the wind tunnel to develop a body conversion kit made from high-strength yet especially lightweight carbon fiber. It not only adds 36 millimeters (1.4 inches) to the width of the E-Class and gives it an even more striking appearance; it also minimizes aerodynamic lift on front and rear axle.

The BRABUS front was designed to replace the original apron and provides radiators and front brakes with an optimal supply of cooling air. At the same time the sophisticated shape notably reduces aerodynamic lift on the front axle.

Air vents located behind the wheel arches were integrated into the front fenders. They are also vital to the thermal health of all components in the engine bay and help vent the front wheel houses to reduce lift on the front axle.

The rocker panels route the air stream to the rear wheel arches with minimum turbulence. The rear wheel arches of the “one in ten” edition feature special cowlings called ‘Speed Spads.’

The striking rear of the new BRABUS E V12 sets itself apart with the four characteristic tailpipes of the BRABUS high-performance exhaust system. Also part of the sophisticated aerodynamic-enhancement concept is the rear wing on the trunk lid and the diffuser integrated into the rear apron.

A wider track means better directional stability at high speeds. The widened fenders front and back make room for BRABUS Monoblock Q wheels in size 9.5Jx19. The high-performance tires so essential for these extreme speeds are supplied by technology partners Pirelli and YOKOHAMA. They are mounted on the front axle in size 255/35 ZR 19 and in size 285/30 ZR 19 in back.

The height-adjustable BRABUS coil-over suspension was also custom-developed for the E V12. The ride height of the suspension can be adjusted to the owner’s individual preferences. But that’s not all: Compression and rebound rates of the front and rear dampers can be adjusted in ten steps between very comfortable and extremely firm for use on the racetrack. Sport sway bars reduce body roll in fast corners.

The enormous performance of the BRABUS E V12 also places highest demands on the brakes. The high-performance sedan is equipped with 12-piston aluminum fixed calipers and vented and grooved steel brake discs measuring 380 x 37 millimeters (15.0 x 1.5 inches) on the front axle. The rear axle stops on six-piston aluminum fixed calipers gripping discs measuring 360 x 28 millimeters (14.2 x 1.1 inches). The BRABUS high-performance brake system incorporates all functions of the standard Brake Assist system of the Mercedes E-Class.

The interior of the car exudes a feeling of true exclusive luxury. The sporty-contoured custom front seats and the two rear individual seats are covered with a combination of Alcantara and black leather, smooth or perforated, as are dashboard, door trim and headliner. The entire vehicle floor is covered with square-patterned leather. It alone uses several miles of the finest thread, every inch of it sewn with utmost precision.

The ensemble is completed with matte-black carbon-fiber components for dashboard, center console and door panels. The BRABUS E V12 “one of ten” can be optionally equipped with a cell phone from premium manufacturer Vertu. This exclusive cell phone from the “Vertu Ascent Ti Carbon Fibre” limited edition of 1,500 phones features a titanium housing with the sides clad in black carbon fiber. This especially exclusive phone features 3G and quad-band technology as well as an integrated hands-free option, and represents state-of-the-art communication technology.

Only ten BRABUS E V12 sedans of the “one of ten” edition will be built by hand in a small-series production run. Alternatively the BRABUS E V12 is also offered in a version with 750 hp / 552 kW and a pointedly subtle bodywork without cowlings and rear wing.

BRABUS E V12 “one of ten” – Technical Data

Body

4-door sedan based on Mercedes-Benz E-Class, model series W 212.

Unibody, with BRABUS fender flares and steel body widened by 36 millimeters (1.4 inches). BRABUS E V12 “one of ten” carbon-fiber aerodynamic-enhancement kit with front apron, air vents in front fenders, ‘speed spads’ wheel-house cowlings, rear spoiler lip and rear diffuser. BRABUS hood with integrated RAM-air system.

Dimensions:

Wheelbase 2,760 mm – 108.7 in.
Length 4.891 mm – 192.6 in.
Width 1.908 mm – 75.1 in.
Height 1.422 mm – 56.0 in.
Curb weight 1.980 kg – 4,365 lbs.
Gross vehicle weight 2.390 kg – 5,269 lbs.
Fuel tank/reserve 80 l / 9.0 l – 21.1 gal. / 2.4 gal.

Engine

BRABUS SV12 R Biturbo 800 displacement engine based on Mercedes 600.

V12-cylinder 3-valvel light-alloy engine with two turbochargers
Displacement 6,233 cm³
Compression ratio 9.0 : 1
Rated power output 800 hp (788 bhp) / 588 kW at 5,500 rpm
Torque 1,420 Nm (1,047 lb-ft) from 2,100 rpm (electronically limited to
1,100 Nm / 811 lb-ft)
Fuel Super plus (98 ROZ) / Premium gasoline 98 octane
Motor oil: ARAL

BRABUS SV12 R Biturbo 800 engine conversion consists of:
Displacement increase to 6.3 liters with special crankshaft with longer stroke and larger cylinder bore and corresponding pistons. Inlet and outlet ports of both cylinder heads optimized for mixture flow including installation of special camshafts. BRABUS SV12 R Biturbo 800 system with two high-performance turbochargers and special exhaust manifolds with integrated turbine housings, four water-to-air intercoolers and special air intake tract. BRABUS stainless-steel high-performance exhaust system with free-flow metal catalysts. Newly programmed mapping for engine electronics and on-board diagnostics.

Powertrain

RWD, ESP

Reinforced five-speed automatic transmission

Gear ratios
1st gear 3.59
2nd gear 2.19
3rd gear 1.41
4th gear 1.00
5th gear 0.83
Reverse gear 3.16

BRABUS limited-slip differential with locking rate of 40 percent
Final drive ratio either 2.65 : 1 (V/max 315 km/h / 196 mph) or 2.24 : 1 (V/max more than 370 km/h / 230 mph), electronically limited for use on public roads to 350 km/h / 217 mph).

Suspension

Independent suspension front and back with height-adjustable BRABUS coil-over sport suspension.

Front axle:
Three-link axle, anti-dive geometry. Height-adjustable BRABUS struts with coil springs and gas-pressure shocks with ten selectable settings for compression and rebound, BRABUS sport sway bars.

Rear axle:
Multi-link suspension. Anti-squat and anti-dive geometry. Height-adjustable BRABUS struts with coil springs and gas-pressure shocks with ten selectable settings for compression and rebound, BRABUS sport sway bars.

Wheels:
BRABUS Monoblock Q light-alloy wheels with Pirelli or YOKOHAMA high-performance tires.
Front: 9.5J x 19 H2 with size 255/35 ZR 19 tires
Rear: 9.5J x 19 H2 with size 285/30 ZR 19 tires

Brake system

Dual-circuit brake system with Brake Assist and BRABUS high-performance brakes

Front: BRABUS 12-piston aluminum fixed calipers and vented and grooved steel discs measuring 380 x 37 mm (15.0 x 1.5 inches)
Rear: BRABUS six-piston aluminum fixed calipers with vented and grooved steel discs measuring 360 x 28 mm (14.2 x 1.1 inches)

Performance

0 – 100 km/h (62 mph): 3.7 sec.
0 – 200 km/h (124 mph): 9.9 sec.
0 – 300 km/h (186 mph): 23.9 sec.

Top speed: More than 370 km/h / 230 mph (for tire safety reasons limited electronically for use on public roads to 350 km/h / 217 mph)

The new E-Class Coupé offers a very special combination of two attributes for which the Mercedes brand is known: fascination and efficiency. With its classic coupé side aspect – no B-pillars and fully retractable side windows – the new two-door car is a particularly sporty interpretation of the E-Class’s dynamic design. At the same time the most aerodynamic variant of the Coupés achieves a new world best in terms of drag coefficient: with a Cd-figure of just 0.24, this model is the world’s most aerodynamically efficient series-production car. The model programme includes two new 4-cylinder engines, which consume up to 17% less fuel whilst offering a significant increase in performance and torque. The new E-Class Coupé’s standard-fit AGILITY CONTROL suspension adjusts automatically to the current driving situation. It combines driving enjoyment and excellent handling with the maximum comfort. The new E-Class Coupé will be in the showrooms of the European Mercedes-Benz dealerships and company-owned sales outlets at the beginning of May 2009.

The new Coupé offers all the technical innovations of the new E-Class series that one might expect to find in a sports-oriented luxury coupé. These include selective damper control, drowsiness detection, preventive occupant protection and the Active Bonnet. As a feature specific to the Coupé, the Dynamic Driving package allows different suspension setups at the touch of a button. Adaptive Main Beam Assist, road sign recognition and an automatic emergency braking system are other features with which the new series sets standards in this vehicle category.

The E-Class also takes on a pioneering role in the drive sector. The new diesels and direct-injection petrol engines combine efficiency with an effortless power delivery. The engine line-up includes two new four-cylinder models which deliver significantly more power and torque while consuming up to 17 percent less fuel. The best example is the E 250 CDI BlueEFFICIENCY Coupé, which consumes 5.3 litres of diesel per 100 kilometres and emits 139 grams of CO2 per kilometre, making it one of the most economical vehicles in its class.

The exemplary, low fuel consumption has not only been achieved because of the new engines, but also with a number of practical measures. These include on-demand activation of the steering and fuel pumps, the use of tyres with low rolling resistance and an alternator control system which takes account of the current driving situation and the vehicle’s electrical power requirements, plus the very decisive factor of outstanding aerodynamics .

An overview of the engines:

Design which expresses passion and effortless superiority

The design of the new two-door model includes traditional styling elements which give Mercedes-Benz Coupés their unmistakable identity: for example the side windows, which are not interrupted by a B-pillar and are fully retractable. Another hallmark of Mercedes Coupé design is the sports radiator grille with the large central star. At the same time, however, the new model points the way to the future with an exciting, contemporary design idiom.

At the same time the Coupé shows its close family resemblance to the E-Class
Saloon. This is shown by the ‘twin-headlamp face’, with rhomboid contours but somewhat sportier, sharper treatment for a more dynamic and incisive look. Another design feature which the Coupé shares with the Saloon is the powerful contour of the rear wing – a styling cue which also gave the S 220 “Ponton” Coupé of 1955 its athletic appearance.

Although it shares family traits with the Saloon, the Coupé has its own, distinct identity characterised by effortless superiority and a greater sense of passion. The arrow shape of the entire front section from front bumper to radiator to bonnet, the more extreme interpretation of the twin headlamp face and its more sinewy build give it a racier and more dynamic presence.

Newly developed seats with a sporty design

The seats of the E-Class Coupé are new developments whose design and techno-logy reflect the sporty nature of this two-door Mercedes. They are electrically adjustable for seat height and backrest angle as standard. The high, sports car-like seat backrests have a practical Easy-Entry function to make access and egress easier for rear-seat passengers. In conjunction with electric seat adjustment with memory (an optional extra), the front seats are equipped with electropneumatically adjustable four-way lumbar supports; these are able to provide anatomically favourable support for the lower spine, which further improves seating comfort.

Luxury seats with leather upholstery and active ventilation are available as optional extras, as are newly developed multicontour seats with inflatable air chambers in the front seat cushions as well as in the centre and side bolsters of the backrests. Two comfortable individual seats are available for the rear passengers. These feature backrests which can be folded down individually or together to increase the capacity of the luggage compartment.

Engines: fuel consumption down by 17 percent

The diesel in the E 250 CDI BlueEFFICIENCY Coupé is the top-of-the-range unit in the new generation of Mercedes-Benz four-cylinder engines, which are notable for features such as two-stage turbocharging, precise piezo injectors and the latest common-rail technology. The engine has an output of 150 kW/204 hp and develops a maximum torque of 500 newtonmetres which is available from just 1600 rpm. This means that it is some 36 percent more powerful than the four-cylinder diesel in the preceding model yet consumes 17 percent less fuel: 5.3 litres per 100 kilometres (combined NEDC consumption, provisional figure). This corresponds to a carbon dioxide emission level of 138 grams per kilometre.

The turbocharged V6 diesel engine with common-rail direct injection remains in the line-up. Fitted in the E 350 CDI BlueEFFICIENCY Coupé, it develops 170 kW/231 hp (previously: 165 kW/224 hp) and consumes 6.8 litres per 100 kilometres (combined) in the NEDC cycle. Its carbon-dioxide emissions are 179 grams per kilometre.

Two new petrol engines with direct injection

Mercedes-Benz has also chosen to move over to direct-injection technology for its petrol engines. Once again, the E-Class Coupé points the way: the powerplant at work under the bonnet of the E 250 CGI BlueEFFICIENCY Coupé is a newly developed four-cylinder direct-injection unit with 150 kW/204 hp and a five-speed automatic transmission as standard. This engine makes do with 7.0 litres of fuel per 100 kilometres (combined NEDC consumption, provisional figure). CO2 emissions are 164 grams per kilometre. This is some 13 percent less than the figure for the previous four-cylinder engine (135 kW/184 hp) with conventional fuel injection.

Mercedes-Benz has replaced the previous V6 petrol engine with the world’s first six-cylinder unit featuring spray-guided direct petrol injection in the new E 350 CGI BlueEFFICIENCY Coupé. This engine develops 215 kW/292 hp – an extra 15 kW/20 hp – and consumes about 14 percent less fuel than the previous V6 engine: its combined NEDC consumption per 100 kilometres is just 8.5 litres. This corresponds to 199 grams of CO2 per kilometre.

In the top-of-the-range model, the E 500 Coupé, the muscular V8 engine with 285 kW/388 hp and 530 newtonmetres of torque offers the performance characteristics of a sports car. Mercedes engineers have enhanced details of the eight-cylinder unit, reducing the fuel consumption (compared to the preceding model) by 0.5 litres to 10.9 litres per 100 kilometres (combined NEDC consumption). All the engines in the new E-Class Coupés meet the EU5 exhaust emission standard.

Safety: sensors, radar and cameras for safe driving

The safety systems newly developed for the E-Class are based on accident research findings; they can make a valuable contribution to enabling safe, accident-free driving, improving vehicle occupant protection and, moreover, helping to increase the safety of other road users. These trend-setting developments are also available for the new E-Class Coupé, or are included in its standard equipment. Based on highly sensitive sensors, cameras and radar systems, they turn this two-door model into an “intelligent partner” able to see, feel and react reflexively in critical situations and, if necessary, act independently if the danger of an accident is acute.

Drowsinessis one of the most common causes of accidents on motorways. This is why Mercedes experts have developed the ATTENTION ASSIST system which forms part of the standard equipment of the new E-Class Coupé. As the vehicle is being driven, the system continuously evaluates more than 70 different parameters in order to identify driver drowsiness and provide a warning before the dangerous microsleep phase begins. Observing the driver’s steering behaviour has proved to be a particularly strong indicator: several years of practical research by Mercedes engineers have shown that drowsy drivers make minor steering errors which they often correct very rapidly in a characteristic way. This steering behaviour is recognised by a special steering angle sensor.

Also fitted as standard is the PRE-SAFE® anticipatory occupant protection system – a Mercedes invention which has received a number of awards and which is not offered by any other vehicle in this class. If there is an immediate danger of an accident occurring, the system activates protective measures for the driver and front passenger as a precaution so that the seat belts and airbags can provide their full protective effect on impact. This warning of an impending accident is possible because PRE-SAFE® uses the sensors of the Brake Assist system and the Electronic Stability Program (ESP®) to identify potentially critical dynamic handling situations.

Adaptive Main Beam Assist for the best possible road illumination

Like the Saloon, the new E-Class Coupé also offers the latest lighting technology. The headlamps adjust continuously to the current driving situation and react automatically to offer the driver the best possible degree of road illumination at all times. This task is taken care of by the Adaptive Main Beam Assist function: a camera fitted on the inside of the windscreen allows the system to detect oncoming vehicles/vehicles in front and automatically controls the headlamps to prevent the other road users from being dazzled. As a result, the range of the dipped-beam headlamps can increase from the current norm of 65 metres to as much as 300 metres. If the road ahead is clear, the system performs a gradual transition to high-beam mode.

Adaptive Main Beam Assist is based on the bi-xenon headlamps, which Mercedes-Benz offers in combination with LED daytime driving lights.

Automatic emergency braking when a collision is imminent

The well-proven assistance systems from the S-Class which help to prevent rear-end collisions are now available for the E-Class Coupé, too. They use long and short-range radar sensors to monitor the traffic situation ahead of the vehicle and warn the driver if there is a risk of an accident. Mercedes-Benz combines these technologies in the DISTRONIC PLUSsystem; along with the proximity control system – which automatically maintains the Coupé at a set distance from the vehicle in front and can brake it to a standstill if required by the traffic situation – this comprises Brake Assist PLUS and the PRE-SAFE® Brake.

Brake Assist PLUS intervenes if there is suddenly a very rapid reduction in the distance. In this situation, the system warns the driver and almost instantaneously calculates the degree of braking assistance necessary to prevent a collision. This brake force is available immediately the driver depresses the brake pedal. Depending on the speed and distance, it allows controlled braking to a defined point or – if necessary – emergency braking.

The PRE-SAFE® Brake goes a step further and automatically brakes the E-Class if there is imminent danger of a collision and the driver does not react to the warnings. This can reduce the severity of an impact considerably, as the system can be regarded as something like an “electronic crumple zone” which offers the occupants an even greater degree of safety.

Most comprehensive array of safety features in this vehicle category

With seven standard-fit airbags, belt tensioners and belt force limiters on all seats, as well as crash-responsive head restraints for the driver and front passenger, the new E-Class Coupé offers the most comprehensive array of safety features in this vehicle category. The range of airbags, which can deploy in thousandths of a second in an accident, comprises front and side airbags for the driver and front passenger, a kneebag for the driver and windowbags. Rear sidebags are available as an optional extra.

The front crumple zone has four independent impact planes which allow the forces to be distributed over a wide area while bypassing the passenger cell. Furthermore, increased use of extra-high-strength steel alloys helps the vehicle body to withstand high impact loads. In fact, particularly strong grades of steel like this account for about two thirds of all the sheet metal used in the bodyshell of the E-Class Coupé.

An Active Bonnet, which forms part of the standard equipment, is the latest development to result from Mercedes-Benz’s long-standing and successful commitment to pedestrian protection. In the event of an impact, a system of springs raises the rear section of the bonnet by 50 millimetres within a fraction of a second, thereby increasing the available deformation space. A special feature of the Mercedes system is its reversible mechanism which allows the driver to reset the Active Bonnet without having to visit a workshop.

Comfort: advanced technology for a new driving experience

Along with safety, comfort has always been one of the outstanding qualities of the E-Class. Here, too, the Coupé lives up to the high standard set by the Saloon and demonstrates further noticeable progress, especially with regard to ride, seating and climate comfort. Another important comfort factor is the generous interior space, which Mercedes engineers created by increasing both the length and width of the vehicle body by 46 millimetres. This resulted in the distance between the front and rear seat reference points – an important dimension for the occupants’ freedom of movement – increasing by ten millimetres to 789 mm while the elbow width improved by up to 49 millimetres, compared to the preceding model.

High standard of ride comfort through selective damper control

The new E-Class Coupé’s standard-fit AGILITY CONTROL suspension adjusts automatically to the current driving situation. In order to provide the best possible ride comfort, this system reduces the damping during normal driving but immediately applies the maximum damping force during dynamic cornering or sudden evasive manoeuvres. This ensures optimum stabilisation of the Coupé.

As an alternative to the standard-fit AGILITY CONTROL suspension which is set up for comfort, a variant with a sportier damper response and more direct steering – the AGILITY CONTROL sports suspension – is available as an optional extra. To meet the requirements of even more demanding drivers, Mercedes-Benz has developed a dynamic handling package with an electronically controlled damping system. This processes sensor data about the current driving situation and adjusts the shock absorbers separately for each wheel. Furthermore, the driver can switch between two drive modes – Comfort and Sport – which make corresponding adjustments to the suspension set-up, accelerator response and the shift points of the automatic transmission. A newly developed speed-sensitive sports steering system with a more direct ratio and variable centring is also included in the dynamic handling package.

In order to allow a comparison of suspension characteristics, Mercedes engineers have developed the body index – a composite formula which is calculated from the readings for various typical driving manoeuvres. The body index is an indi-cation of how well the suspension is linked to the body, how closely the car hugs the road and how nimble the handling is through fast bends. The higher the figure, the sportier – i.e. the firmer – the suspension characteristics.

The body index shows how the dynamic handling package is able to meet customers’ requirements for dynamism and comfort in equal measure: the index figure of 2.06 attained in Sport mode is reduced to 1.89 – a typical level for a saloon – when Comfort mode is selected.

Individual climatic comfort at the touch of button

The newly developed luxury automatic climate control system regulates the temperature, volume and distribution of the air in three zones to meet the requirements of the driver, front passenger and rear passengers. What’s more, for the first time, this optional THERMOTRONIC system allows the selection of different climatisation modes: the occupants can choose “Diffuse”, “Medium” or “Focus” modes at the touch of a button in order to adapt the air volume and distribution to their personal preferences while still benefiting from the convenience and comfort of automatically regulated climate control. Fitted as standard in the E-Class Coupé, the THERMATIC two-zone automatic climate control has been enhanced to offer five percent more heating and cooling power than the version fitted in the predecessor model.

Infotainment system with colour display in the dashboard

The well-proven operating concept from the S-Class, comprising the multifunction steering wheel, Controller on the centre tunnel, colour display in the dash-board and direct selection buttons also offers the occupants of the new E-Class Coupé a very high standard of operating comfort.

The Controller puts all the functions of the advanced infotainment system – such as the radio, CD/DVDplayer, telephone and navigation system – at the fingertips of the driver and front passenger. The Audio 20 CD radio with eight loudspeakers, a CD player and a Bluetooth interface for a mobile phone is fitted as standard. Customers who specify the optional COMAND APS multimedia system benefit from additional functions: a Europe-wide hard-disc navigation system, a DVDchanger, the Music Register (storage for about 1000 music tracks) and voice control with whole-word recognition. Further options for even greater listening pleasure are available in the form of a 500-watt surround sound system, a media interface for connecting external MP3 players and a tuner for digital radio reception.

Model range: individuality through variety

With an initial line-up of five engines, three suspension variants, a wide choice of colours, six different wheel/tyre combinations and many optional extras, the new E-Class Coupé offers plenty of scope for customers to turn their individual automotive dreams into reality. The basis for configuring the look and feel of the Coupé is provided by the ELEGANCE and AVANTGARDE interior concepts.

These not only offer different upholsteries and items of trim, but are complete configuration packages designed to create a harmonious atmosphere. Depending on the choice, the interior differs in its colour scheme and mix of materials to emphasise the elegant or progressive character of the Coupé.

The AMG Sports package, on the other hand, clearly focusses on agility and performance potential. AMG bodystyling includes the unmistakable contours of the AMG front apron with large air intakes, AMG side skirts and the expressive AMG rear apron with a black insert. High-sheen 18-inch AMG light-alloy wheels in a 6 twin-spoke design with wide-base tyres in size 235/40 R 18 at the front and 255/35 R 18 at the rear provide further highlights. The AGILITY CONTROL sports suspension with a stiffer spring, shock absorber and stabiliser setup is combined with large, perforated brake discs at the front, plus brake callipers with Mercedes-Benz lettering. Perfect road contact is ensured by the sports speed-sensitive steering with a more direct ratio.

Striking interior features include upholstery in black ARTICO man-made leather. Leather or the particularly exclusive nappa leather is also available in a wide range of colours. Multicontour seats for the driver and front passenger provide the best possible adjustment to personal comfort preferences, thereby ensuring outstanding long-distance comfort.

With production limited to the first few months, the E-Class Coupé is also available as a Prime Edition series which particularly emphasises the new model’s character with selected, high-grade features. Among the most eye-catching are the palladium silver metallic paint finish, a panoramic glass sliding roof and 18-inch AMG high-sheen light-alloy wheels painted in titanium grey. Inside, a designo-interior with two-tone designo leather upholstery, matching designo floor mats and a sports pedal cluster of brushed stainless steel rounds off the exclusive overall impression.

The Mercedes-Benz E-Class Coupé can be ordered from 19 February. Prices in Germany (including 19 percent VAT):

E 250 CDI BlueEFFICIENCY Coupé: 44,684.50 Euro
E 350 CDI BlueEFFICIENCY Coupé: 48,671.00 Euro
E 250 CGI BlueEFFICIENCY Coupé: 44,684.50 Euro
E 350 CGI BlueEFFICIENCY Coupé: 51,408.00 Euro
E 500 Coupé: 66,045.00 Euro

Mercedes-Benz has improved the already exemplary long-distance comfort of the E-Class even further in the new saloon, including intelligent bodyshell technology with up to 30 percent greater rigidity, further improved seats and a newly developed suspension whose shock absorbers automatically adjust to the current driving situation. The optional air suspension now works together with an electronic damping system.

The outstanding safety and comfort of the E-Class are matched by its environmental compatibility and economy: the four- and six-cylinder engines are direct-injection units, and consume up to 23 percent less fuel than before. The combined NEDC consumption of the new four-cylinder diesel engines is just 5.3 litres per 100 kilometres, which corresponds to 139 grams of CO2 per kilometre. All the engines for the new E-Cass meet the EU5 emission standard, and in the case of the E 350 BlueTEC the emissions are already below the EU6 limits planned for 2014 .

Apart from the engines, the BlueEFFICIENCY package for the E-Class is in large part responsible for a considerable fuel saving. Engineers from every development department have worked together to optimise assemblies and components, to save fuel by means of reduced weight, a new form, improved functioning or efficient energy management.

The work done in the wind tunnel was particularly successful, for with a drag coefficient of only 0.25, the new E-Class is the world’s most aerodynamically efficient luxury saloon. It betters the already good Cd figure of the preceding model by another four percent, which represents a fuel saving of around 0.25 litres per 100 kilometres when driving at a motorway speed of 130 km/h. The aerodynamics are for example improved by variable fan louvres, which control the airflow to the engine compartment in line with requirements.

Other BlueEFFICIENCY measures include newly developed tyres with up to 17 percent lower rolling resistance, energy-saving control of the generator, fuel pump, air conditioning compressor and power steering, and the ECO start/stop functionwhich switches the engine of the new E 200 CGIoff when idling. Displays in the speedometer inform the driver how much fuel is being consumed (per 100 kilometres), and when he should shift to the next higher gear in the interests of an economical and environmentally conscious style of driving.

The range of engines available for the new E-Class comprises four, six and eight-cylinder units with outputs from 100 kW/136 hp to 386 kW/525 hp. The four-cylinder engines are newly developed direct-injection units, which develop a higher output and torque than the comparable V6-engines of the preceding series despite a smaller displacement. The strategy is to replace to replace large, naturally aspirated engines with turbocharged units which excel with advantages such as lower weight, reduced internal friction and more economical operating characteristics.

Engines: new CDI-four-cylinder units with a fuel consumption of just 5.3 litres and 139 grams of CO2 per kilometre

With three completely newly developed four-cylinder engines, the E-Class also remains one generation ahead where diesel technology is concerned. These engines feature latest-generation common-rail direct injection, fast piezo-electric injectors, improved exhaust gas recirculation and an innovative twin turbocharger, making for fast responsiveness and good performance characteristics. To express this in figures, the E 250 CDI with 150 kW/204 hp and 500 newton metres develops a 25 percent higher torque than the previous V6 diesel engine, but uses around 23 percent less fuel at only 5.3 litres per 100 kilometres (combined NEDC consumption). This corresponds to 139 grams of CO2per kilometre.

The new four-cylinder diesel engine also powers the E 220 CDI with 125 kW/ 170 hp and the E 200 CDI with 100 kW/136 hp, also with a fuel consumption of only 5.3 litres per 100 kilometres.

The top model in the new E-Class diesel range is the six-cylinder E 350 CDI with an output of 170 kW/231 hp, which uses 0.5 litres per 100 kilometres less fuel than the previous E 320 CDI. From autumn 2009 the V6 diesel will also be available as a BlueTEC model with the world’s best emission control technology. The E 350 BlueTEC develops 155 kW/211 hp and meets the EU6 exhaust emission standards planned for 2014. All the other engine variants in the new E-Class meet the EU5 limits.

Petrol engines: 20 percent fuel saving thanks to direct injection

The E 200 CGIand E 250 CGIare equipped with the newly developed four-cylinder direct-injection engine with a displacement of 1.8 litres, turbocharging and variable intake and exhaust camshafts. The E 200 CGI(135 kW/184 hp) is equipped with a six-speed manual transmission and the ECOstart/stop function as standard, and consumes only 6.8 litres of premium petrol per 100 kilometres (combined NEDC consumption, provisional figure). This equates to 159 grams of CO2per kilometre.

In the E 250 CGI(150 kW/204 hp), which has a five-speed automatic transmission as standard, maximum torque is now 310 newton metres, which represents an increase of more than 26 percent over the previous V6-engine. At the same time the NEDC fuel consumption is reduced by over 20 percent to 7.4 litres per 100 kilometres, equating to 175 grams of CO2per kilometre (provisional figures).

As before, the E 350 CGI with direct petrol injection (215 kW/292 hp) and the top-of-the-line E 500 (285 kW/388 hp) are included in the range of engine variants in the new E-Class. Detailed improvements have reduced the fuel consumption of these V6/V8 models by up to 0.6 litres per 100 kilometres. As a product from Mercedes-AMG, the new high-performance E 63 AMG develops 386 kW/525 hp.

The V6 and V8-models are equipped with a seven-speed automatic transmission and steering wheel selector lever as standard.

On request the V6 models E 350 CDIand E 350, as well as the eight-cylinder E 500, are available with latest-generation Mercedes all-wheel drive. This system distinguishes itself from previous all-wheel drive technology with greater efficiency, lower weight and more compact construction. These advantages produce noticeably better traction and fuel savings.

Safety: ”Intelligent” partner thanks to unique combination of assistance and protection systems

For more than 50 years, the saloons in the E-Class and their predecessors have been acknowledged as trendsetters in the safety field. The new saloon continues this tradition with an unrivalled combination of the very latest assistance and protection system whose concept and development are based on what actually happens during accidents. These technologies make the E-Class an “intelligent partner“who can see, feel, react reflexively in critical situations and if necessary act independently to prevent accidents or mitigate their consequences. With this concept the new Mercedes model not only protects its own occupants, but also contributes decisively to the greater safety of other road users.

The new E-Class is the first automobile in the world whose headlamps adapt to the traffic situation and respond automatically to avoid dazzling other drivers. The optional Adaptive Main Beam Assist uses a camera on the windscreen to recognise oncoming traffic and vehicles moving ahead, and controls the headlamps so that their beams do not reach the other vehicle. This achieves the best possible road illumination in a given situation. The range of the dipped headlamp beams can be extended from 65 to up to 300 metres. If the road ahead is clear, the system performs a gentle transition to high beam.

Mercedes-Benz offers this new system as a light & sight package that includes bi-xenon headlamps, the Intelligent Light System and LED daytime driving lights.

The Lane Safety package for the new E-Class includes Blind Spot Assist familiar from the S-Class, and as a new development, Lane Keeping Assist which seeks to prevent the vehicle from leaving the road unintentionally. When the system recognises that the car is drifting from its lane, the driver is prompted to take countersteering action by brief but unmistakable vibrations of the steering wheel. The images from the windscreen camera are also used by the new, optionally available Speed Limit Assist , which recognises speed limit signs as the car passes them, then displays the relevant speed limit in the speedometer.

Night View Assist from the S-Class is now also available as an optional extra for the new E-Class. Mercedes-Benz has improved this system with a special pedestrian detection function: as soon as Night View Assist Plus recognises pedestrians ahead of the car, they are highlighted in the onboard display to provide a greatly enhanced warning effect.

Detection of drowsiness based on 70 parameters as standard

Thanks to an innovative technology, the new E-Class has developed a highly sensitive means of monitoring its driver’s attention level, and warns him of drowsiness in good time. This new ATTENTION ASSIST drowsiness detection system, which is standard equipment, is equipped with highly sensitive sensors that continuously monitor more than 70 different parameters. Observing the driver’s steering behaviour has proved to be a particularly strong indicator: several years of practical research by Mercedes engineers have shown that drowsy drivers make minor steering errors that can often be rapidly corrected in characteristic ways. These corrections are recognised by a highly sensitive steering angle sensor.

Automatic emergency braking when a collision is imminent

The well-proven, radar based assistance systems from the S-Class are now also optionally available to E-Class customers. A further development of the long-range radar sensor now has a range of 200 metres (previously 150 metres), and is able to monitor the mid-distance so that dynamic events such as a vehicle ahead suddenly pulling out to overtake can be detected even more effectively. The two wide-angle short-range radar sensors, which have a range of around 30 metres, continue to be included in the system.

The radar-supported systems are able to assist the driver with emergency braking. Their sensors are linked to the Brake Assist PLUS system, which automatically calculates the braking pressure to prevent a collision in critical situations. The driver is given an acoustic and visual warning at the same time. When the brake pedal is depressed, the system immediately activates the calculated level of braking assistance.

If the driver fails to respond to the warnings, the radar system first initiates partial braking action. As a second stage, if there is still no driver response and a collision is unavoidable, emergency braking is initiated. This can considerably lessen the severity of an accident, i.e. the system acts as something like an “electronic crumple zone”.

Active bonnet, seven airbags and PRE-SAFE® as standard

During the course of its development, the new E-Class was subjected to more than 150 high-speed crash tests and a total of more than 17,000 realistic crash simulations. The crumple zone principle invented by the Mercedes safety pioneer Bela Barenyi has been continuously improved by the engineers in Sindelfingen. The front-end deformation zone of the E-Class acts on four independent levels, and is even more effective than before. The increased use of highest-strength steel alloys also helps to ensure that the bodyshell is able to withstand high impact forces. Around 72 percent of all the body panels are made from these high-tech steels – yet another unrivalled figure in passenger car development.

With seven airbags as standard, belt tensioners, belt force limiters, crash-responsive head restraints and ISOFIX child seat attachments, the new E-Class has even more extensive safety features than the preceding model. Another new feature is the active bonnet, which is a continuation of many years of commitment to pedestrian protection on the part of Mercedes-Benz. It is standard equipment in the new E-Class. In the event of an impact, a system of springs raises the rear section of the bonnet by 50 millimetres within fractions of a second, thereby increasing the available deformation space. Thanks to the cleverly conceived mechanism, the driver is able to reset the active bonnet to its normal position himself, without visiting a workshop.

Another standard feature is the preventive occupant protection system PRE-SAFE®. In potentially hazardous situations this reflexively activates precautionary protective measures for the vehicle occupants, so that the seat belts and airbags are able to fulfil their protective function to the full during an impact.

Comfort: Further progresses with adaptive shock absorbers and improved air suspension

As in the safety field, the E-Class has been setting the standards for long-distance comfort in this vehicle class for several decades. Bettering the already high level of the preceding series, Mercedes engineers have achieved further advances with the new saloon – especially where ride, seating and climatic comfort are concerned.

Standard equipment includes a further improved suspension with adaptive shock absorbers. These automatically adapt to the current driving situation by reducing the damping forces when driving normally, thereby noticeably improving ride comfort. When taking bends at speed or during rapid evasive action, the system switches to the maximum damping effect so that the saloon is stabilised to best effect.

A version with dynamic damping characteristics and a lowered suspension is available as an optional alternative to the standard suspension (standard for the AVANTGARDE line).

The air suspension system optionally available for the V6 models (standard in the E 500/E 500 4MATIC) has for the first time been combined with an electronically controlled damping system, which processes various sensor signals and controls each wheel independently. In this way Mercedes specialists have achieved significantly better ride comfort while improving handling safety and agility at the same time. The driver is able to select either comfort or sport mode at the touch of a button.

Well-proven seat technology with a new design

Where seat development is concerned, Mercedes-Benz had added a new quality to a well established Mercedes concept, namely padded seat piping – a sophisticated and demanding upholstery technique that is only used by Mercedes-Benz. This involves the insertion of an additional foam filling under the fabric or leather cover, and gives an immediate feeling of comfort and wellbeing when sitting in the car. There are different versions of this padded seat piping: in the basic model and AVANTGARDE line the upholstery is transversely contoured, while the ELEGANCE line has longitudinal piping and is reminiscent of the well-known and highly effective Mercedes seat design from the 1960s and 70s.

Active multicontour seats with massage function from the S-Class

The active multicontour seat package (optional) includes newly developed multicontour seats with comfort head restraints and a two-stage massage function in the backrest that has proven highly successful in the S-Class. Depending on the steering angle, lateral acceleration and vehicle speed, fast-acting piezo-electric valves on the air chambers in the backrests vary their pressure and volume to give the driver and front passenger even better lateral support.

On request the E-Class is also available with a rear seat unit consisting of two comfortable, single seats. This rear-seat comfort package includes seat heating, leather upholstery, a centre console, comfort head restraints, roller blinds in the rear doors, an electrically operated roller blind for the rear window, comfort sun visors and a through-loading facility to the boot.

Individual climatisation modes at the touch of a button

Mercedes-Benz has developed a climate control system for the E-Class which not only allows individual temperatures to be set in three zones – for the driver, front passenger and rear passengers – but also offers different “climatisation modes”. If this optional THERMOTRONIC system is specified, the occupants of the new E?Class are able to select “Diffuse”, “Medium” or “Focus” at the touch of a button, and adapt the air volume and distribution to their personal preferences without sacrificing the convenience of automatic mode. In standard trim the new E-Class is equipped with the two-zone THERMATIC automatic climate control system.

Design: Distinctive lines flow as an expression of effortless grace and status

In 1995 the E-Class was the first Mercedes model to appear with the highly acclaimed twin-headlamp face – a highly symbolic design feature that still characterises the identity of the E-Class. Nonetheless, the design idiom has remained fluent even for this characteristic styling feature, and has been adapted to suit the self-assured, masculine overall appearance of the saloon. The designers have now reinterpreted these four “eyes” as rectangles, with a direct reference to the interesting geometrical shapes found in cubism. They have the effect of precious gems that have been precisely set into the wings. In the same way, the radiator grille with its three-dimensional chromed surround, dynamic arrow-shape and more upright position underlines the status of the car as the epitome of a business saloon.

A sophisticated interplay between lines and surfaces is one of the hallmarks of today’s Mercedes design. Large concave or convex surface areas are structured by taut, clearly defined lines. This design concept has been perfected down to the last detail in the new E-Class. The flank contours become connecting features that influence the entire body design, i.e. not just the side aspects but also the front and rear-end styling.

At the rear this harmonious flow culminates in a new feature, namely a graceful line that follows the rear wheel arches and lends a clear shape to the imposing, muscular contours of the rear wings. Here Mercedes aficionados will recognise styling features reminiscent of the famous “Ponton Mercedes“ introduced in 1953, which already emphasised its sovereign character with these striking

contours at the time — a symbolic feature, and at the same time a hallmark of the E-Class that well illustrates how tradition is made to harmonise with the future in this model series.

With typical Mercedes attention to detail, the designers have also given great attention to the interior of the new E-Class, ensuring that every feature appeals in both emotional and functional terms with its form, colour or material. The result is a harmonious whole – an atmosphere in which the car’s occupants immediately feel safe and protected, and long journeys can be taken without any feeling of effort or stress. In short: Typically E-Class, welcome home.

Model range: High level of standard appointments and individual variants

Individuality and variety have always been two of the outstanding attributes of the E-Class. The new saloon not only provides Mercedes customers with a choice of ten engines and three suspension variants, but also two design and equipment lines, 12 wheel/tyre combinations in 16, 17, 18 or 19-inch size, twelve exterior paint finishes and six different seat upholstery materials in up to five colour combinations to suit their individual preferences. The choice of interior trim has been doubled versus the preceding series, with the range now including high-gloss exotic wood, open-pored wood and aluminium trim.

Standard specifications already include 16-inch light-alloy wheels in a nine-spoke design, eucalyptus or embossed aluminium trim (optional) and a four-spoke multifunction steering wheel lined in fine nappa leather with chrome inserts. Also included in the standard equipment is the Audio 20 CD infotainment system with a twin receiver, CD-player, eight loudspeakers and a Bluetooth interface for a mobile phone. The colour display in the centre of the dashboard can be operated by the driver or front passenger, using the Controller on the centre console.

The individualisation programme for the E-Class is based on two design and equipment lines. The ELEGANCE line lives up to its name with a decidedly elegant, classic appearance. This is in part due to additional features such as a chrome-plated radiator grille with four silver-painted louvres, 16-inch light-alloy wheels in a ten twin-spoke design, burr walnut trim and stylish ambient lighting with fibre optics that frame the dashboard and door panels.

In contrast the AVANTGARDE line shows the E-Class in a decidedly modern and innovative light. This is ensured by additional standard features such as bi-xenon headlamps with the Intelligent Light System and LED daytime driving lights, LED technology for all the rear lights, 17-inch light-alloy wheels in a five twin-spoke design, a special, lowered suspension setup, ambient lighting and the instrument cluster in a sporty tubular design. This model variant is also distinguishable by its different bumper design and a chrome-plated radiator grille with three glossy, black louvres.

Equipment packages: extras for the discerning customer

In addition to the design and equipment lines, the AMGsports package and the Exclusive package offer more scope for equipping the new E-Class to personal taste. These packages contain high-quality features that are mostly not available in isolation.

In the AMG sports packagethey include bumpers and side skirts in an AMGdesign, sport seats with enhanced lateral support, contrasting decorative seams in the seats and armrests, a three-spoke sports steering wheel with shift paddles, a black roof lining, a lowered sports suspension , perforated disc brakes with the Mercedes logo and 18-inch light-alloy wheels in an AMGdesign.

The Exclusive package includes a wood/leather steering wheel, the roof lining, pillar claddings and sun visors in Alcantara, the seat upholstery, armrest and door panels in nappa leather, an attractively lined dashboard with decorative seams and velours floor mats.

Market position: With ten million models since 60 years the world’s most successful business saloon

The new E-Class saloon is the successor to a Mercedes model that has been successful throughout the world, and of which more than 1.3 million examples have been sold since 2002. In Germany more than 40 percent of all saloons in this market segment have an “E” in their model plate, and in many western European countries this Mercedes model series is the number one in the luxury class.Since 1947, when the Model 170 V was introduced as the direct ancestor to the E-Class, Mercedes-Benz has produced more than ten million saloons belonging to this series. This makes the E-Class easily the world’s most successful business saloon.

The new E-Class will appear in the showrooms of the European Mercedes sales and service outlets and dealerships in March 2009.